simono41/LCD-show
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ok

Browse source 
ok
This commit is contained in:
goodtft 2017-06-16 11:38:15 +08:00
parent 33907b4cf2
commit b8c3838ed3
28 changed files with 722 additions and 11 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

22
LCD28-show
View file

@ -1,4 +1,5 @@
sudo mkdir -p /etc/X11/xorg.conf.d #!/bin/bash
sudo mkdir /etc/X11/xorg.conf.d
sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/ sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/
sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/tft9341.dtbo sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/tft9341.dtbo
sudo cp -rf ./usr/99-calibration.conf-28 /etc/X11/xorg.conf.d/99-calibration.conf sudo cp -rf ./usr/99-calibration.conf-28 /etc/X11/xorg.conf.d/99-calibration.conf
@ -6,4 +7,23 @@ sudo cp -rf ./usr/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
sudo cp ./usr/cmdline.txt /boot/ sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/inittab /etc/ sudo cp ./usr/inittab /etc/
sudo cp ./boot/config-28.txt /boot/config.txt sudo cp ./boot/config-28.txt /boot/config.txt
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot sudo reboot

22
LCD32-show
View file

@ -1,4 +1,5 @@
sudo mkdir -p /etc/X11/xorg.conf.d #!/bin/bash
sudo mkdir /etc/X11/xorg.conf.d
sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/ sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/
sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/tft9341.dtbo sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/tft9341.dtbo
sudo cp -rf ./usr/99-calibration.conf-32 /etc/X11/xorg.conf.d/99-calibration.conf sudo cp -rf ./usr/99-calibration.conf-32 /etc/X11/xorg.conf.d/99-calibration.conf
@ -6,4 +7,23 @@ sudo cp -rf ./usr/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
sudo cp ./usr/cmdline.txt /boot/ sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/inittab /etc/ sudo cp ./usr/inittab /etc/
sudo cp ./boot/config-32.txt /boot/config.txt sudo cp ./boot/config-32.txt /boot/config.txt
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot sudo reboot

22
LCD35-show
View file

@ -1,4 +1,5 @@
sudo mkdir -p /etc/X11/xorg.conf.d #!/bin/bash
sudo mkdir /etc/X11/xorg.conf.d
sudo cp ./usr/tft35a-overlay.dtb /boot/overlays/ sudo cp ./usr/tft35a-overlay.dtb /boot/overlays/
sudo cp ./usr/tft35a-overlay.dtb /boot/overlays/tft35a.dtbo sudo cp ./usr/tft35a-overlay.dtb /boot/overlays/tft35a.dtbo
sudo cp -rf ./usr/99-calibration.conf-35 /etc/X11/xorg.conf.d/99-calibration.conf sudo cp -rf ./usr/99-calibration.conf-35 /etc/X11/xorg.conf.d/99-calibration.conf
@ -6,4 +7,23 @@ sudo cp -rf ./usr/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
sudo cp ./usr/cmdline.txt /boot/ sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/inittab /etc/ sudo cp ./usr/inittab /etc/
sudo cp ./boot/config-35.txt /boot/config.txt sudo cp ./boot/config-35.txt /boot/config.txt
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot sudo reboot

31
LCD35DPI-show Normal file
View file

@ -0,0 +1,31 @@
#!/bin/bash
sudo cp -rf ./boot/config-35DPI.txt /boot/config.txt
sudo cp ./usr/bcm2709-rpi-2-b.dtb /boot/
sudo cp ./usr/bcm2710-rpi-3-b.dtb /boot/
sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/qddpi24.dtb /boot/overlays/
sudo cp ./usr/qddpi24.dtb /boot/overlays/qddpi24.dtbo
sudo cp ./usr/inittab /etc/
sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
sudo mkdir -p /etc/X11/xorg.conf.d
sudo cp -rf ./usr/99-calibration.conf-3508 /etc/X11/xorg.conf.d/99-calibration.conf
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot

27
LCD35H_480_320-show Normal file
View file

@ -0,0 +1,27 @@
#!/bin/bash
sudo cp -rf ./boot/config-35-480X320.txt /boot/config.txt
sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/inittab /etc/
sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
sudo mkdir -p /etc/X11/xorg.conf.d
sudo cp -rf ./usr/99-calibration.conf-3508 /etc/X11/xorg.conf.d/99-calibration.conf
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot

27
LCD35H_600_400-show Normal file
View file

@ -0,0 +1,27 @@
#!/bin/bash
sudo cp -rf ./boot/config-35-600X400.txt /boot/config.txt
sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/inittab /etc/
sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
sudo mkdir -p /etc/X11/xorg.conf.d
sudo cp -rf ./usr/99-calibration.conf-3508 /etc/X11/xorg.conf.d/99-calibration.conf
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot

27
LCD35H_720_480-show Normal file
View file

@ -0,0 +1,27 @@
#!/bin/bash
sudo cp -rf ./boot/config-35-720X480.txt /boot/config.txt
sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/inittab /etc/
sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
sudo mkdir -p /etc/X11/xorg.conf.d
sudo cp -rf ./usr/99-calibration.conf-3508 /etc/X11/xorg.conf.d/99-calibration.conf
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot

27
LCD35H_810_540-show Normal file
View file

@ -0,0 +1,27 @@
#!/bin/bash
sudo cp -rf ./boot/config-35-810X540.txt /boot/config.txt
sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/inittab /etc/
sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
sudo mkdir -p /etc/X11/xorg.conf.d
sudo cp -rf ./usr/99-calibration.conf-3508 /etc/X11/xorg.conf.d/99-calibration.conf
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot

27
LCD35H_960_640-show Normal file
View file

@ -0,0 +1,27 @@
#!/bin/bash
sudo cp -rf ./boot/config-35-960X640.txt /boot/config.txt
sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/inittab /etc/
sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
sudo mkdir -p /etc/X11/xorg.conf.d
sudo cp -rf ./usr/99-calibration.conf-3508 /etc/X11/xorg.conf.d/99-calibration.conf
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot

22
LCD397-show
View file

@ -1,7 +1,27 @@
#!/bin/bash
sudo cp -rf ./boot/config-397.txt /boot/config.txt sudo cp -rf ./boot/config-397.txt /boot/config.txt
sudo cp ./usr/cmdline.txt /boot/ sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/inittab /etc/ sudo cp ./usr/inittab /etc/
sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
sudo mkdir -p /etc/X11/xorg.conf.d sudo mkdir /etc/X11/xorg.conf.d
sudo cp -rf ./usr/99-calibration.conf-397 /etc/X11/xorg.conf.d/99-calibration.conf sudo cp -rf ./usr/99-calibration.conf-397 /etc/X11/xorg.conf.d/99-calibration.conf
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot sudo reboot

22
LCD43-show
View file

@ -1,7 +1,27 @@
#!/bin/bash
sudo cp -rf ./boot/config-43.txt /boot/config.txt sudo cp -rf ./boot/config-43.txt /boot/config.txt
sudo cp ./usr/cmdline.txt /boot/ sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/inittab /etc/ sudo cp ./usr/inittab /etc/
sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
sudo mkdir -p /etc/X11/xorg.conf.d sudo mkdir /etc/X11/xorg.conf.d
sudo cp -rf ./usr/99-calibration.conf-43 /etc/X11/xorg.conf.d/99-calibration.conf sudo cp -rf ./usr/99-calibration.conf-43 /etc/X11/xorg.conf.d/99-calibration.conf
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot sudo reboot

22
LCD5-show
View file

@ -1,7 +1,27 @@
#!/bin/bash
sudo cp -rf ./boot/config-5.txt /boot/config.txt sudo cp -rf ./boot/config-5.txt /boot/config.txt
sudo cp ./usr/cmdline.txt /boot/ sudo cp ./usr/cmdline.txt /boot/
sudo cp ./usr/inittab /etc/ sudo cp ./usr/inittab /etc/
sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
sudo mkdir -p /etc/X11/xorg.conf.d sudo mkdir /etc/X11/xorg.conf.d
sudo cp -rf ./usr/99-calibration.conf-5 /etc/X11/xorg.conf.d/99-calibration.conf sudo cp -rf ./usr/99-calibration.conf-5 /etc/X11/xorg.conf.d/99-calibration.conf
nodeplatform=`uname -n`
kernel=`uname -r`
version=`uname -v`
if test "$nodeplatform" = "raspberrypi";then
echo "this is raspberrypi kernel"
version=${version%% *}
version=${version#*#}
echo $version
if test $version -lt 970;then
echo "reboot"
else
echo "need to update touch configuration"
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "reboot"
fi
else
echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
fi
sudo reboot sudo reboot

34
ReadMe.txt Normal file
View file

@ -0,0 +1,34 @@
[version]
v1.1
[Driver installation]
Step1, Install Raspbian official mirror
1)Download Raspbian official mirror:https://www.raspberrypi.org/downloads/
2)Use“SDFormatter.exe”to Format your TF Card，
3)Use“Win32DiskImager.exe” Burning mirror to TF Card。
Step2, Install LCD Driver
1)Copy “LCD-show-160701.tar.gz” to the root directory of raspberry pi（you can copy it directly to TF card after Step1, or use SFTP to remote copy）
2)Landing Raspberry pi system to user command line (Name:pi,Password:raspberry)，Execute the following command:
cd /boot
sudo tar zxvf LCD-show-160701.tar.gz
cd LCD-show/
#For 2.8inch RPI LCD excute:
sudo ./LCD28-show
# For 3.2inch RPI LCD excute:
sudo ./LCD32-show
# For 3.5inch RPI LCD excute:
sudo ./LCD35-show
# For 3.97inch RPI LCD excute:
sudo ./LCD397-show
# For 4.3inch RPI LCD excute:
sudo ./LCD43-show
# For 5inch RPI LCD excute:
sudo ./LCD5-show
# For 7inch(B)-800X480 RPI LCD excute:
sudo ./LCD7B-show
# For 7inch(C)-1024X600 RPI LCD excute:
sudo ./LCD7C-show
# If you need to switch back to the traditional HDMI display excute:
Sudo ./LCD-hdmi
3)Wait a few minutes,the system will restart automaticall , enjoy with your LCD.

63
boot/config-35-480X320.txt Normal file
View file

@ -0,0 +1,63 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_drive=2
hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 480 320 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900

63
boot/config-35-600X400.txt Normal file
View file

@ -0,0 +1,63 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_drive=2
hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 600 400 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900

63
boot/config-35-720X480.txt Normal file
View file

@ -0,0 +1,63 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_drive=2
hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 720 480 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900

63
boot/config-35-810X540.txt Normal file
View file

@ -0,0 +1,63 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_drive=2
hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 810 540 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900

63
boot/config-35-960X640.txt Normal file
View file

@ -0,0 +1,63 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_drive=2
hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 960 640 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900

2
boot/config-35.txt
View file

@ -54,5 +54,5 @@ enable_uart=1
# Enable audio (loads snd_bcm2835) # Enable audio (loads snd_bcm2835)
dtparam=audio=on dtparam=audio=on
dtoverlay=tft35a:rotate=90 dtoverlay=tft35a
dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900 dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

73
boot/config-35DPI.txt Normal file
View file

@ -0,0 +1,73 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=1
dtoverlay=qddpi24
overscan_left=0
overscan_right=0
overscan_top=0
overscan_bottom=0
framebuffer_width=480
framebuffer_height=320
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
dpi_output_format=0x07f003
hdmi_timings=321 0 28 18 28 480 0 2 2 4 0 0 0 60 0 32000000 6
dtoverlay=ads7846,cs=1,penirq=18,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900

2
boot/config-43.txt
View file

@ -56,7 +56,7 @@ enable_uart=1
dtparam=audio=on dtparam=audio=on
max_usb_current=1 max_usb_current=1
display_rotate=0 display_rotate=0
hdmi_drive=1 max_usb_current=1
hdmi_group=2 hdmi_group=2
hdmi_mode=87 hdmi_mode=87
hdmi_timings=480 0 1 41 2 272 0 2 10 2 0 0 0 60 0 9000000 3 hdmi_timings=480 0 1 41 2 272 0 2 10 2 0 0 0 60 0 9000000 3

1
boot/config-5.txt
View file

@ -55,7 +55,6 @@ enable_uart=1
# Enable audio (loads snd_bcm2835) # Enable audio (loads snd_bcm2835)
dtparam=audio=on dtparam=audio=on
max_usb_current=1 max_usb_current=1
hdmi_drive=1
hdmi_group=2 hdmi_group=2
hdmi_mode=1 hdmi_mode=1
hdmi_mode=87 hdmi_mode=87

1
boot/config-7B-800x480.txt
View file

@ -55,7 +55,6 @@ enable_uart=1
# Enable audio (loads snd_bcm2835) # Enable audio (loads snd_bcm2835)
dtparam=audio=on dtparam=audio=on
max_usb_current=1 max_usb_current=1
hdmi_drive=1
hdmi_group=2 hdmi_group=2
hdmi_mode=1 hdmi_mode=1
hdmi_mode=87 hdmi_mode=87

1
boot/config-7C-1024x600.txt
View file

@ -55,7 +55,6 @@ enable_uart=1
# Enable audio (loads snd_bcm2835) # Enable audio (loads snd_bcm2835)
dtparam=audio=on dtparam=audio=on
max_usb_current=1 max_usb_current=1
hdmi_drive=1
hdmi_group=2 hdmi_group=2
hdmi_mode=1 hdmi_mode=1
hdmi_mode=87 hdmi_mode=87

6
usr/99-calibration.conf-3508 Normal file
View file

@ -0,0 +1,6 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3945 233 3939 183"
Option "SwapAxes" "1"
EndSection

BIN
usr/bcm2709-rpi-2-b.dtb Normal file
View file

Binary file not shown.

BIN
usr/bcm2710-rpi-3-b.dtb Normal file
View file

Binary file not shown.

BIN
usr/qddpi24.dtb Normal file
View file

Binary file not shown.