LCD driver for the Raspberry PI Installation
==================================================== Update:

----------------------------------------------------- v1.2-20170302

NOTE:if you are using the newest Raspbian version:2017-03-02
you need to additional excute this two command bellow after Step1,2,3 beed excuted,
if not so,the Resistive touch to reverse or cannot be calibrated.
This additional two command bellow just for Raspbian-2017-03-02:

```sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb```
```sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf```

Update:

----------------------------------------------------- v1.1-20160815

1.)Step1, Install Raspbian official mirror

==================================================== a)Download Raspbian official mirror:
https://www.raspberrypi.org/downloads/
b)Use“SDFormatter.exe”to Format your TF Card
c)Use“Win32DiskImager.exe” Burning mirror to TF Card
2.) Step2, Clone my repo onto your pi

==================================================== ```git clone https://github.com/goodtft/LCD-show.git```
```chmod -R 755 LCD-show```
```cd LCD-show/```
3.)Step3, According to your LCD's type, excute: ==================================================== In case of 2.8" LCD

```sudo ./LCD28-show```

In case of 3.2" LCD

```sudo ./LCD32-show```

In case of 3.5" LCD

```sudo ./LCD35-show```

In case of 3.97" LCD

```sudo ./LCD397-show```

In case of 4.3" LCD

```sudo ./LCD43-show```

In case of 5" LCD

```sudo ./LCD5-show```

In case of 7inch(B)-800X480 RPI LCD

```sudo ./LCD7B-show```

In case of 7inch(C)-1024X600 RPI LCD

```sudo ./LCD7C-show```

If you need to switch back to the traditional HDMI display

```sudo ./LCD-hdmi```

4.) Wait a few minutes,the system will restart automaticall , enjoy with your LCD. ======================================================================================