diff --git a/README.md b/README.md
index 69d9de7..aa23b2d 100644
--- a/README.md
+++ b/README.md
@@ -1,28 +1,30 @@
-# Wireguard
+# WireGuard
 
-This is a simple Docker image to run a Wireguard client. It includes a kill switch to ensure that any traffic not encrypted via Wireguard is dropped.
+This is a simple image to run a WireGuard client. It includes a kill switch to ensure that any traffic not encrypted via WireGuard is dropped.
 
-Wireguard is implemented as a kernel module, which is key to its performance and simplicity. However, this means that Wireguard _must_ be installed on the host operating system for this container to work properly. Instructions for installing Wireguard can be found [here](http://wireguard.com/install).
+WireGuard is implemented as a kernel module, which is key to its performance and simplicity. However, this means that WireGuard _must_ be installed on the host operating system for this container to work properly. Instructions for installing WireGuard can be found [here](http://wireguard.com/install).
 
-You will need a configuration file for your Wireguard interface. Many VPN providers will create this configuration file for you. For example, [here](http://mullvad.net/en/download/wireguard-config) is the configuration generator for Mullvad. Be sure to NOT include a kill switch in the configuration file, since the Docker image already has one.
+You will need a configuration file for your WireGuard interface. Many VPN providers will create this configuration file for you. If your VPN provider offers to include a kill switch in the configuration file, be sure to DECLINE, since this container image already has one.
 
-Now simply mount the configuration file and run! For example, if your configuration file is located at `/path/to/conf/mullvad.conf`:
+Now simply mount the configuration file and run!
+
+## Docker
 
 ```bash
-docker run --name wireguard                                          \
-    --cap-add NET_ADMIN                                              \
-    --cap-add SYS_MODULE                                             \
-    --sysctl net.ipv4.conf.all.src_valid_mark=1                      \
-    -v /path/to/conf/mullvad.conf:/etc/wireguard/mullvad.conf        \
-    jordanpotter/wireguard
+$ docker run --name wireguard                                      \
+  --cap-add NET_ADMIN                                              \
+  --cap-add SYS_MODULE                                             \
+  --sysctl net.ipv4.conf.all.src_valid_mark=1                      \
+  -v /path/to/your/config.conf:/etc/wireguard/wg0.conf             \
+  jordanpotter/wireguard
 ```
 
 Afterwards, you can link other containers to this one:
 
 ```bash
-docker run -it --rm                                                  \
-    --net=container:wireguard                                        \
-    appropriate/curl http://httpbin.org/ip
+$ docker run --rm                                                  \
+  --net=container:wireguard                                        \
+  curlimages/curl ifconfig.io
 ```
 
 ## Docker Compose
@@ -40,51 +42,64 @@ services:
     sysctls:
       net.ipv4.conf.all.src_valid_mark: 1
     volumes:
-      - /path/to/conf/mullvad.conf:/etc/wireguard/mullvad.conf
+      - /path/to/your/config.conf:/etc/wireguard/wg0.conf
     restart: unless-stopped
 
   curl:
-    image: appropriate/curl
-    command: http://httpbin.org/ip
+    image: curlimages/curl
+    command: ifconfig.io
     network_mode: service:wireguard
     depends_on:
       - wireguard
 ```
 
+## Podman
+
+```bash
+$ podman run --name wireguard                                      \
+  --cap-add NET_ADMIN                                              \
+  --cap-add NET_RAW                                                \
+  --sysctl net.ipv4.conf.all.src_valid_mark=1                      \
+  -v /path/to/your/config.conf:/etc/wireguard/wg0.conf             \
+  docker.io/jordanpotter/wireguard
+```
+
+Afterwards, you can link other containers to this one:
+
+```bash
+$ podman run --rm                                                  \
+  --net=container:wireguard                                        \
+  docker.io/curlimages/curl ifconfig.io
+```
+
 ## Local Network
 
 If you wish to allow traffic to your local network, specify the subnet(s) using the `LOCAL_SUBNETS` environment variable:
 
 ```bash
-docker run --name wireguard                                          \
-    --cap-add NET_ADMIN                                              \
-    --cap-add SYS_MODULE                                             \
-    --sysctl net.ipv4.conf.all.src_valid_mark=1                      \
-    -v /path/to/conf/mullvad.conf:/etc/wireguard/mullvad.conf        \
-    -e LOCAL_SUBNETS=10.1.0.0/16,10.2.0.0/16,10.3.0.0/16             \
-    jordanpotter/wireguard
+$ docker run --name wireguard                                      \
+  --cap-add NET_ADMIN                                              \
+  --cap-add SYS_MODULE                                             \
+  --sysctl net.ipv4.conf.all.src_valid_mark=1                      \
+  -v /path/to/your/config.conf:/etc/wireguard/wg0.conf             \
+  -e LOCAL_SUBNETS=10.1.0.0/16,10.2.0.0/16,10.3.0.0/16             \
+  jordanpotter/wireguard
 ```
 
-Additionally, you can expose ports to allow your local network to access services linked to the Wireguard container:
+Additionally, you can expose ports to allow your local network to access services linked to the WireGuard container:
 
 ```bash
-docker run --name wireguard                                          \
-    --cap-add NET_ADMIN                                              \
-    --cap-add SYS_MODULE                                             \
-    --sysctl net.ipv4.conf.all.src_valid_mark=1                      \
-    -v /path/to/conf/mullvad.conf:/etc/wireguard/mullvad.conf        \
-    -p 8080:80                                                       \
-    jordanpotter/wireguard
+$ docker run --name wireguard                                      \
+  --cap-add NET_ADMIN                                              \
+  --cap-add SYS_MODULE                                             \
+  --sysctl net.ipv4.conf.all.src_valid_mark=1                      \
+  -v /path/to/your/config.conf:/etc/wireguard/wg0.conf             \
+  -p 8080:80                                                       \
+  jordanpotter/wireguard
 ```
 
 ```bash
-docker run -it --rm                                                  \
-    --net=container:wireguard                                        \
-    nginx
+$ docker run --rm                                                  \
+  --net=container:wireguard                                        \
+  nginx
 ```
-
-## Versioning
-
-Wireguard is new technology and its behavior may change in the future. For this reason, it's recommended to specify an image tag when running this container, such as `jordanpotter/wireguard:2.1.4`.
-
-The available tags are listed [here](https://hub.docker.com/r/jordanpotter/wireguard/tags).