#!/bin/ash set -e default_route_ip=$(ip route | grep default | awk '{print $3}') if [[ -z "$default_route_ip" ]]; then echo "No default route configured" >&2 exit 1 fi configs=`find /etc/wireguard -type f -printf "%f\n"` if [[ -z "$configs" ]]; then echo "No configuration file found in /etc/wireguard" >&2 exit 1 fi config=`echo $configs | head -n 1` interface="${config%.*}" if [[ "$(cat /proc/sys/net/ipv4/conf/all/src_valid_mark)" != "1" ]]; then echo "sysctl net.ipv4.conf.all.src_valid_mark=1 is not set" >&2 exit 1 fi # The net.ipv4.conf.all.src_valid_mark sysctl is set when running the container, so don't have WireGuard also set it sed -i "s:sysctl -q net.ipv4.conf.all.src_valid_mark=1:echo Skipping setting net.ipv4.conf.all.src_valid_mark:" /usr/bin/wg-quick # Start WireGuard wg-quick up $interface # IPv4 kill switch: traffic must be either (1) to the WireGuard interface, (2) marked as a WireGuard packet, (3) to a local address, or (4) to the container network container_ipv4_network="$(ip -o addr show dev eth0 | awk '$3 == "inet" {print $4}')" container_ipv4_network_rule=$([ ! -z "$container_ipv4_network" ] && echo "! -d $container_ipv4_network" || echo "") iptables -I OUTPUT ! -o $interface -m mark ! --mark $(wg show $interface fwmark) -m addrtype ! --dst-type LOCAL $container_ipv4_network_rule -j REJECT # IPv6 kill switch: traffic must be either (1) to the WireGuard interface, (2) marked as a WireGuard packet, (3) to a local address, or (4) to the container network container_ipv6_network="$(ip -o addr show dev eth0 | awk '$3 == "inet6" {print $4}')" if [[ "$container_ipv6_network" ]]; then container_ipv6_network_rule=$([ ! -z "$container_ipv6_network" ] && echo "! -d $container_ipv6_network" || echo "") ip6tables -I OUTPUT ! -o $interface -m mark ! --mark $(wg show $interface fwmark) -m addrtype ! --dst-type LOCAL $container_ipv6_network_rule -j REJECT else echo "IPv6 interface not found, skipping IPv6 kill switch" >&2 fi # Allow traffic to local subnets for local_subnet in ${LOCAL_SUBNETS//,/$IFS} do echo "Allowing traffic to local subnet ${local_subnet}" >&2 ip route add $local_subnet via $default_route_ip iptables -I OUTPUT -d $local_subnet -j ACCEPT done shutdown () { wg-quick down $interface exit 0 } trap shutdown SIGTERM SIGINT SIGQUIT sleep infinity & wait $!