LCD driver for the Raspberry PI Installation

Update:

v1.2-20170302

NOTE:
if you are using the newest Raspbian version:2017-03-02
you need to additional excute this two command bellow after Step1,2,3 excuted,
if not so,the Resistive touch to reverse or cannot be calibrated.
This additional two command bellow just for Raspbian-2017-03-02:

sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf

Update:

v1.1-20160815

1.)Step1, Install Raspbian official mirror

a)Download Raspbian official mirror:
https://www.raspberrypi.org/downloads/
b)Use“SDFormatter.exe”to Format your TF Card
c)Use“Win32DiskImager.exe” Burning mirror to TF Card

2.) Step2, Clone my repo onto your pi

git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/

3.)Step3, According to your LCD's type, excute:

In case of 2.8" LCD

sudo ./LCD28-show

In case of 3.2" LCD

sudo ./LCD32-show

In case of 3.5" LCD

sudo ./LCD35-show

In case of 3.97" LCD

sudo ./LCD397-show

In case of 4.3" LCD

sudo ./LCD43-show

In case of 5" LCD

sudo ./LCD5-show

In case of 7inch(B)-800X480 RPI LCD

sudo ./LCD7B-show

In case of 7inch(C)-1024X600 RPI LCD

sudo ./LCD7C-show

If you need to switch back to the traditional HDMI display

sudo ./LCD-hdmi

4.) Wait a few minutes,the system will restart automaticall , enjoy with your LCD.