2.2 KiB
LCD driver for the Raspberry PI Installation
Update:
v1.2-20170302
NOTE:
if you are using the newest Raspbian version:2017-03-02
you need to additional excute this two command bellow after Step1,2,3 excuted,
if not so,the Resistive touch to reverse or cannot be calibrated.
This additional two command bellow just for Raspbian-2017-03-02:
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
Update:
v1.1-20160815
1.)Step1, Install Raspbian official mirror
a)Download Raspbian official mirror:
https://www.raspberrypi.org/downloads/
b)Use“SDFormatter.exe”to Format your TF Card
c)Use“Win32DiskImager.exe” Burning mirror to TF Card
2.) Step2, Clone my repo onto your pi
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
3.)Step3, According to your LCD's type, excute:
In case of 2.8" LCD
sudo ./LCD28-show
In case of 3.2" LCD
sudo ./LCD32-show
In case of 3.5" LCD
sudo ./LCD35-show
In case of 3.97" LCD
sudo ./LCD397-show
In case of 4.3" LCD
sudo ./LCD43-show
In case of 5" LCD
sudo ./LCD5-show
In case of 7inch(B)-800X480 RPI LCD
sudo ./LCD7B-show
In case of 7inch(C)-1024X600 RPI LCD
sudo ./LCD7C-show
If you need to switch back to the traditional HDMI display
sudo ./LCD-hdmi